Tramex Building Survey Master Kit - BSMK

Kit for surveying and inspecting moisture in buildings

The Tramex Building Survey Master Kit is the ultimate kit for non-destructive testing of moisture content and humidity conditions in drywall, wood, plaster, brick, ceramic tiles, resilient flooring, laminates and roofing and numerous building materials and air spaces.

The RWS Roof & Wall Scanner allows for instant, non-destructive evaluation of moisture conditions deep within wall and roofing systems.

The Moisture Encounter MEX5 moisture meter measures moisture content in wood and drywall and provides comparative readings in a variety of building materials. It also features a built-in hygrometer for ambient conditions and psychrometric values, an Infrared Surface Thermometer and also incorporates the external RH probe for in-situ equilibrium RH readings, as well as the pin probe for wood, drywall, and WME readings. The insulated 200mm pins and narrow 127mm RH probe allow for deep wall cavity and insulation pin probing.

Bluetooth connectivity to the Tramex Meters App allows for visualization of readings, moisture mapping and data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts, as well as see your meter screen on your phone when extending to hard to reach places.

The Tramex Building Survey Master Kit comes with extension handles and a protective heavy-duty carrying case with die-cut foam lining.

Kit Contents
Roof and Wall Scanner - RWS
Moisture Encounter MEX5 - MEX5
Heavy-duty pin-type electrode - HH14TP30
200mm insulated pins for in-depth penetration using pin probe - SP200
Short narrow Wand Relative Humidity Probe - RHP-SNWB
Calibration Check Salts for Relative Humidity probe - SAL75
Extension Handle - E5-HBS
Heavy-duty carrying case with die-cut foam lining - MAXMASTER

Specifications

Roof and Wall Scanner RWS
Size: 125mm x 275mm x 75mm
Weight: 853g
Construction: ABS Body
Power: 9 volt PP3 Battery (included)
Display: Analog
Depth of penetration: 100mm

Sensitivity
Four Ranges:
Roofing Mode with high and low sensitivity.
EIFS / Foam Roof Insulation Mode with high and low sensitivity

Accessories:
Leather carry case.
Telescopic handle for use on roofs only.

Limitations:
Some EPDM, Butyl rubber roofing and other conductive roofing.
Hard Coat Stucco, wire lath or wire mesh reinforced finishes.

Moisture Encounter MEX5
Size: 180mm x 85mm x 40mm
Weight: 500g
Construction: ABS Body
Power: 2 x AALR6 ALKALINE (included)
Display: Digital 58mm x 35mm
Depth of penetration: Shallow signal: up to 9mm
Deep signal: up to 30mm

Measuring range of Moisture Encounter MEX5:
NDT Moisture content for Wood: 0 → 30% MC
NDT Comparative for Building Materials: 0 → 100
Pin % MC Wood: 6 → approx 50% MC
Pin % MC Drywall: 0 → 8.5% MC
Relative Humidity: 0 → 99%
(with optional Hygro-i2 ® probe): Humidity accuracy: 0% → 99%RH +/- 2% @ 25°C

Relative Humidity Sensor specifications:
Range: 0 to 100%RH
Accuracy: ±1.5%RH Range 0% to 80%RH ±2.0%RH Range 80% to 99%RH (@ 25ºC)
Resolution: 0.1% over the complete range
Drift: <0.25%RH per year

Temperature Sensor specifications:
Range: -40ºC to 125ºC
Accuracy: ±0.1 °C Range 20°C to 60°C
Sensor Protection: PTFE Film protects sensor opening from water & dust Drift: 0.03ºC per year
Drift: <0.03ºC per year

Specifications of Kit:
Size: 52cm x 40cm x 15cm
Weight: 4.51kg
Power: 2 x AALR6 ALKALINE, 1 x 9 volt PP3 Battery (included)